Status: app version v26.11.250.0
COLMAP points for Gaussian splats
For Gaussian splats (e.g. LichtFeld Studio), the sparse points from a COLMAP export (RealityScan) can be cleaned and cropped beforehand. The cameras stay unchanged, so the export always writes the original axis orientation.
| Action | Effect |
|---|---|
| File → “Load point cloud…” with points3D.txt | Loads the COLMAP text file as a colored point cloud. The cameras are still loaded separately. Only the text file is read, not points3D.bin. |
| Axes… on the cloud card | Chooses which axis of the file points up: +Z, −Z, +Y or −Y. RealityScan exports usually have −Y up. Can be changed at any time; reset returns to +Z. The cloud is only rotated, never mirrored. Shapes and the section box do not rotate with it. |
| Clean and crop | The existing tools (outlier cleanup, section box, boundary) work on the cloud unchanged. Cleaning and cropping are not stored in the project: after reconnecting the file (↺) the cloud is complete again and must be cleaned again before exporting. |
| File → “Cleaned COLMAP points (points3D.txt)” | Writes the surviving original lines byte for byte. Only the “Number of points” header line is updated. There is no axis question: the export always uses the original axis orientation, which matches the cameras. If the cloud was moved or aligned, the dialog warns. |
| Replace in the COLMAP sparse/ folder | Replace the existing points3D.txt in sparse/ with the exported file. LichtFeld loads it for training. The images.txt stays unchanged and still references the removed points. Let us know if LichtFeld complains. |
| File → “Export point cloud (PLY)” | Writes a binary PLY file with colors in world coordinates; the CRS is stored in the header. The axis question only appears when the up axis has been changed. |
| Axis question for PLY and LAS | Only with changed axes does the export ask: “Changed axes” or “Original axes of the file”. “Original axes” writes without a CRS entry, because the values no longer stand for east, north and height. |
| Axes with two loaded clouds | Axes can only be changed while a single cloud is loaded. With a second cloud the change is refused: change the axes first, then load the second cloud. |
Work with your own point cloud.
Open point clouds, trace existing features and export geometry for CAD — directly in your browser, with point cloud data processed locally.
Try free for 14 daysRequest a demo