Status: app version v26.11.250.0

Vector editing

Action Effect
LockLock shape; editing and deletion are blocked.
EyeToggle shape visibility.
X, Y, ZLock axis before or during the drag; snap is off.
Alt while draggingConstrain movement to exactly horizontal or vertical 90° direction. Hold the key only after grabbing the point (Ctrl works as an alias — but during a vertex drag only WITHOUT Shift, see the Shift rows).
Shift while vertex/axis draggingSnap onto visible point cloud or other visible vertices.
Shift+click on a shapeStarts a multi-selection; the previously selected shape is carried over (can be switched off in Settings: “Shift-click keeps the existing selection”).
Hold E, pointer on the circle centreArrows in the world axes: red = X, green = Y, blue = Z (height). An arrow moves the whole circle along that axis; the "drag radius" state stays active. Releasing E hides the gizmo.
Hold E, pointer on the edge handleEdge gizmo in the surface's own coordinate system: red = along the edge, green = across in the surface (outward for areas, left for lines), blue = surface normal. An arrow moves both endpoints of the edge; releasing E hides the gizmo. Flat surfaces, straight lines and volumes use the world system.
Shift+Ctrl or Shift+Cmd while vertex/axis draggingSnap onto other visible vertices ONLY — the point-cloud snap stays off. Made for corners where several shapes meet: Shift links them, and they should not be pulled away by cloud points. In this combination only Alt still constrains to 90°.
Alt on the plane handlePlace vertex directly at the mouse position in the active plane.
Shift+Alt on the plane handleDirect placement with point-cloud snap.
XY, ZY, ZXMove vertex within the chosen plane; the third axis stays constant.
Mid-sphereInsert a new vertex between two existing vertices.
Right-click in edit modeNavigation/pan stays free.
Rotate shapeMove button 2× — drag the ring (X/Y/Z); Shift 1° / Ctrl 15° / Alt 45°.
Rotate and mirror a groupSelect several shapes (Shift+click, “Select all same”, Layer window): in the group bar, click “Move” a second time to get the ring for rotating them together around the centre of the group (Shift 1° / Ctrl 15° / Alt 45°); “Fine rotate…” rotates around Z; “Mirror ↔” and “Mirror ↕” mirror the selection at the group centre (area winding is kept, text annotations only move with their position). Locked shapes are skipped; everything is one undo step. Duplicate keeps the copies' positions relative to each other.
Boundary: crop cloud / cut holeOn the area marked as boundary (shape card): “Crop cloud” keeps only the points INSIDE (all heights); “Cut hole” does the opposite and removes the points INSIDE while keeping everything outside. Both act permanently on the active slot (including the display-rate and DEM-projection backups), cannot be undone and ask for confirmation with the point counts; bake an open transform chain first. A point exactly on the edge belongs to exactly one of the two sides.
Alignment (grid)Icon rail: “Alignment” tile. “Pick reference…” (click an edge of any shape, Esc cancels) or “Use as alignment” on the shape card lays a line grid in the shape's plane, parallel (red) and perpendicular (green) to the edge. Mesh size is adjustable (also in Settings). The grid is a snapshot, never appears in exports and cannot be clicked. “Set drawing plane here” works for areas only. Esc does not close the tile; “Close” only hides the tile, the grid stays until “Show alignment grid” is unchecked or “Remove reference” is pressed.
Right-angle (shape card)Starts the reference mode: click an edge (an own edge stays fixed, a foreign edge — locked shapes included — sets the direction); a neighbour suggestion (≤ 5 m, ±10°) is pre-marked, Enter accepts it, without one the longest own edge. Esc cancels. After the reference is chosen, the fine-rotate popup opens — even if nothing was changed. Shift-click computes immediately without a reference (also with the popup). Only edges within the tolerance (Settings → Display, default 10°) are straightened: near-90° edges and almost-straight kinks; oblique angles stay oblique, and if nothing is in range nothing changes. Edges are squared one by one against the reference direction (not every 90° corner); evenly curved chains (circles, arcs) stay untouched; without a reference the longest edge is used.
Active lineThe line being drawn or selected is shown thicker and its vertices are orange-red; the selected point stays gold.
Offset: presets and distance 0The top right of the offset dialog holds three presets for the base distance (default 0.00 / 0.04 / 0.08 m, editable, in the chosen unit). Exactly one box is ticked; its value pre-fills the “Base distance” field and every copy row that still follows the pre-fill (distances you typed by hand stay). The ticked box and the values are remembered. Distance 0 is allowed: the copy lies on the original in XY, only the table’s Z offset applies (connectors of length 0 are dropped). The dashed preview is always drawn on top of the point cloud.
Right-click on the insertion point of an edgeTurns the edge into an arc: drag the apex handle with the left button, the arc follows the mouse (Shift snaps to a point). Release to apply. Right-click on the apex handle opens radius/sagitta/side/segments and “Straighten”.
Right-click on a point, then click a second oneArc from point to point: the points in between are removed and the arc is fitted through them as well as possible (status line: max. deviation). For areas, W switches to the other path.
Drag arc start/endThe arc stays an arc and keeps its opening angle.
Circle: centre handleDragging moves the circle (Shift snaps the centre), right-click changes the diameter.
Circle: right-click a rim point, then dragChanges the radius with the centre fixed: the rim point follows the mouse (Shift snaps to a point) and the radius is shown at the pointer. Release applies, Esc cancels.
Alignment grid / drawing plane (“Alignment” tile)Tool rail → “Alignment”: pick an edge as reference (Esc cancels) — a line grid in the shape's plane shows parallels (red) and perpendiculars (green) to the edge, every 10th line emphasised; mesh size in the tile and settings (one value). “Set drawing plane here” (areas only) takes origin, direction and mesh size; the grid then follows the pointer (at most 400 lines per direction). Settings → “Snap to grid points on the drawing plane” snaps newly placed points (Shift snap, the 90° lock and typed length take precedence).
Drape (shape card, group bar)Drops the vertices vertically onto the terrain model (DEM) or the active drawing plane; only Z changes, X/Y stay exact. Points outside the DEM stay unchanged. On the DEM arcs stay arcs unless "Resolve arcs" is chosen and long edges can be densified; on the drawing plane every arc point is placed individually and nothing is densified. Optional offset. Slope planums are skipped because their target height is stored in the slope. One undo step; it is a snapshot — the shapes do not follow a later DEM rebuild.
Click snap while drawingSettings → “Snap to the nearest point while drawing”: if a click does not hit a point, the cloud point closest on screen within the configured search radius is used — helpful on sparse clouds. Off by default. The angle drag (Alt+Shift) and vertex editing do not use the snap.
Choose shape infoSettings → Display → “Shape info”: switch edge length, edge gradient, height at vertices, corner angles (number), angle arc, slope arrow, quantities, area & perimeter, slope & inclination, notes and the layer name (first line, off by default) on or off individually; “All on/off” switches all at once. Applies to the view and the A3 PDF export. The angle arc has a fixed screen size (it does not grow when zooming) and can be switched independently of the corner-angle number; it also appears in the A3 PDF. “All on/off” is the master switch and includes angle arc and layer name. With everything off only the name remains. If the sheet shows volumes, the legend of the cut/fill colours sits at the bottom right and the cut/fill figures in the labels use those colours.
Label sizeSmall, Normal, Large or Extra large (0.75 / 1 / 1.25 / 1.5 ×) — view and A3 PDF. Elevation labels (DXF export) and the PDF footer stay unchanged.
Main info sizeSettings → Display → "Main info size" (1 / 1.5 / 2 / 2.5 ×): enlarges only the multi-line label in the middle of the shape; at every level each line keeps its height, the box grows with the line count. Applies in the view and in the A3 PDF.
Shape info: selected and imported shapesSettings → Display → “Shape info for selected shapes only” (default on): only the selected shape, the shape being edited (vertex/edge drag, move) and all shapes multi-selected with Shift show their info — an imported one too. A plain click on a locked shape (e.g. a DXF import) shows its info as well, until you click into empty space. With the switch off, all drawn shapes show their info. “Shape info for imported shapes (DXF/GeoJSON)” (default off) then treats imported shapes like drawn ones (only effective with “selected only” off); the shape itself stays unchanged. Applies to the view and the A3 PDF export (selection at export time). Elevation labels are independent of this.
Overlapping labelsSettings → Display → “Hide overlapping labels”: labels that would cover each other in the view or the A3 PDF are hidden; the more important one stays. Angle arcs are never hidden. In the A3 PDF, labels whose anchor lies outside the image frame are also dropped; if only the box protrudes over the edge it is shifted into the sheet.
A3 PDF: views pageThe A3 PDF export appends a second page: four views of the same area (oblique front left, oblique back right, ortho front, ortho right) with the same shape info. Center and width match your current view; your camera stays unchanged. Turn it off under Settings → Display → “A3 PDF: append page 2 with four views”.

Work with your own point cloud.

Open point clouds, trace existing features and export geometry for CAD — directly in your browser, with point cloud data processed locally.

Try free for 14 daysRequest a demo