Status: app version v26.11.250.0
Open-Data-LiDAR
Loads official laser scan tiles (1 km × 1 km, EPSG:25832) directly from the source, crops them to the required area and places the cloud in a slot: next to a loaded cloud, without asking, as a reference in slot B, with no loaded data in slot A; if both slots are full, the known dialog asks. Call: File → Import → "Load open-data LiDAR…".
| Topic | Effect |
|---|---|
| Area | "From loaded data" uses the extent of the analysis-active slot (otherwise the visible shapes) plus a margin (default 25 m, adjustable 0–500 m). "Centre + radius" sets the area in the project CRS; if nothing is loaded yet, the dialog starts in this mode. If data without georeference is loaded, the project CRS must be chosen, otherwise no tile search takes place. If only slot B is occupied, the cloud goes into slot A. "Centre + radius" with no loaded data and no project CRS uses EPSG:25832 and sets it as the project CRS. |
| Tiles | At most 9 tiles; from 5 a warning appears. The dialog checks in advance which tiles exist at the source; missing ones are skipped. Tiles are loaded one after another and can be cancelled. For Bavaria the relay delivers no file size, so the browser fetches it directly from the LDBV service (geoservices.bayern.de; a 200 m square around the tile centre is sent in that request). If that service is unavailable, the dialog shows neither a size nor a point estimate, and the download progress only counts the MB loaded; the data still arrive complete. |
| Sources | Bavaria (LDBV, CC BY 4.0) goes through the relay because the server sends no CORS header. If no relay is set up, Bavaria is not selectable ("relay not set up"). NRW (Geobasis NRW, Datenlizenz Deutschland – Zero – Version 2.0) is loaded directly. |
| Slots | The cloud goes into a slot: next to a loaded cloud, without asking, as a reference in slot B, with no loaded data in slot A; if both slots are full, the known dialog asks. It carries a source credit ("Datenquelle: …" and "zugeschnitten und zusammengeführt"). The project remembers its origin (provider, tiles, area, load time). |
| "Reload from source" | When a project is opened, reloads the same tiles from the source instead of asking for a file. If the source is newer in the meantime, this is reported; if tiles are missing, that is reported too. |
| "Save reference (LAZ)" | Writes the downloaded source state as LAZ: the cropped tiles as they were loaded (EPSG:25832, source heights, no slot offset). Edits made in the slot (crop, denoise, merge) are not included. The file is LAS 1.2 (point format 3), not the source format: colours are always written (grey fill), attributes only LAS 1.4 knows are dropped; positions and heights stay exact. The source credit is in the file header. After the project is opened, "Choose saved file…" re-attaches this file to the pending slot. The saved file does not replace the source and only holds the state at the time of saving. |
| Limits | No colours: the sources supply no RGB. Bavaria comes in two tile generations (LAS 1.2 and LAS 1.4 with extra bytes); both are read. The cloud is a snapshot of the download; later changes at the source only show after a new load. Heights are in NHN (DHHN2016); to run them as NHN, the project needs a loaded geoid. |
Work with your own point cloud.
Open point clouds, trace existing features and export geometry for CAD — directly in your browser, with point cloud data processed locally.
Try free for 14 daysRequest a demo