Status: app version v26.11.250.0

COLMAP points for Gaussian splats

For Gaussian splats (e.g. LichtFeld Studio), the sparse points from a COLMAP export (RealityScan) can be cleaned and cropped beforehand. The cameras stay unchanged, so the export always writes the original axis orientation.

Action Effect
File → “Load point cloud…” with points3D.txtLoads the COLMAP text file as a colored point cloud. The cameras are still loaded separately. Only the text file is read, not points3D.bin.
Axes… on the cloud cardChooses which axis of the file points up: +Z, −Z, +Y or −Y. RealityScan exports usually have −Y up. Can be changed at any time; reset returns to +Z. The cloud is only rotated, never mirrored. Shapes and the section box do not rotate with it.
Clean and cropThe existing tools (outlier cleanup, section box, boundary) work on the cloud unchanged. Cleaning and cropping are not stored in the project: after reconnecting the file (↺) the cloud is complete again and must be cleaned again before exporting.
File → “Cleaned COLMAP points (points3D.txt)”Writes the surviving original lines byte for byte. Only the “Number of points” header line is updated. There is no axis question: the export always uses the original axis orientation, which matches the cameras. If the cloud was moved or aligned, the dialog warns.
Replace in the COLMAP sparse/ folderReplace the existing points3D.txt in sparse/ with the exported file. LichtFeld loads it for training. The images.txt stays unchanged and still references the removed points. Let us know if LichtFeld complains.
File → “Export point cloud (PLY)”Writes a binary PLY file with colors in world coordinates; the CRS is stored in the header. The axis question only appears when the up axis has been changed.
Axis question for PLY and LASOnly with changed axes does the export ask: “Changed axes” or “Original axes of the file”. “Original axes” writes without a CRS entry, because the values no longer stand for east, north and height.
Axes with two loaded cloudsAxes can only be changed while a single cloud is loaded. With a second cloud the change is refused: change the axes first, then load the second cloud.

Work with your own point cloud.

Open point clouds, trace existing features and export geometry for CAD — directly in your browser, with point cloud data processed locally.

Try free for 14 daysRequest a demo