Status: app version v26.11.250.0

Cross-sections

Cross-sections calculate cut and fill along an axis by the profile method – a second, independent calculation next to the grid of volume A/B. The result is profile lines on a layer, plus profile view, longitudinal section and a quantity table in the dialog.

Topic Effect
WorkflowChoose “Cross-sections…” on the card of an open polyline (the axis). The dialog calculates a preview: profiles perpendicular to the axis at a fixed spacing, plus start, end and every bend of 15° or more. The selected profile is shown as a line in the 3D view; page through them with the buttons or the arrow keys ← → (when the dialog has focus, not inside an input field). “Apply” creates one line per profile labelled with its station (one undo step). Locked axes from DXF are allowed; the axis itself is not changed.
FieldsStart station, profile spacing (0.5 to 1000 m), width left and right of the axis (0 to 500 m, not both 0) and sampling step across the axis (0.01 to 10 m, at most 4000 sampling points per profile). All lengths use the selected unit. Reference (before) and comparison (after) are point cloud or DTM; with a coupled volume A/B its surfaces are taken over, including plane and TIN. “Exaggeration” 1×, 2×, 5× or 10× only affects the profile view.
What is createdOn the target layer one line per profile across the axis (heights from the reference), labelled with the station. In the dialog: the profile view (cut and fill in the colours from Settings → Display → Cut/fill colours, default yellow and red), the longitudinal section of both surfaces over the station, the quantity table per section (scrollable) and the totals.
RecreateIf the axis already has cross-sections, the card shows “Recreate cross-sections…”. The dialog opens with the remembered values and states how many profile shapes are replaced; manual changes to them are lost. Locked profile shapes prevent replacing. Saved sources of a cross-section keep the terrain-surface replacement of the volume, even if that volume is deleted.
Quantities (average end area method)For each section between two profiles: the mean of the two areas times the station distance, separately for cut and fill (average end area method). There is no curvature correction; on a curved axis the quantity is therefore an approximation. Totals are formed from unrounded section values. Bulking and compaction of a coupled volume A/B feed into loose haul and fill demand.
Cross-checkIf a volume A/B is coupled, its grid result is shown beside it with the deviation of the balance in percent. The grid calculates inside the polygon of the volume, the cross-sections inside the band around the axis – equal numbers are only expected if both areas coincide. A difference is therefore not an error by itself but a reason to check.
SnapshotCross-sections are a snapshot. If axis, surfaces or cloud change afterwards, the shapes do not follow; only “Recreate cross-sections…” recalculates. Deleting the axis leaves the profile shapes in place.
When nothing is createdThe dialog names the reason and creates nothing: the axis is shorter than 1 cm; there is no surface along the band around the axis; there would be more than 2000 profiles; reference and comparison are in different coordinate frames; a slot has an unconfirmed move or alignment; a shape is being edited or another dialog is open; a locked profile shape would be replaced.
LimitsAccuracy depends on the sampling step and on the surface (cloud grid, DTM, TIN). On tight curves neighbouring profiles can cross; this is counted and marked in the table but not corrected. Profiles with gaps in the surface data are marked incomplete, the missing width does not count. There is no REB exchange file and no design profiles from standard cross-sections.

Work with your own point cloud.

Open point clouds, trace existing features and export geometry for CAD — directly in your browser, with point cloud data processed locally.

Try free for 14 daysRequest a demo