Status: app version v26.11.250.0

Quantity report (PDF)

The quantity report puts several volumes (A/B volumes and classic volumes) into one PDF file: a table with area, cut, fill and net per volume, a totals row, optionally a site plan, and a page with the basis of the figures.

Topic Effect
Opening and selectionFile → Export → "Quantity report (PDF)...". The dialog lists all volumes, A/B volumes and classic volumes together in shape-list order. Those whose shape and layer are visible and that have a valid result are pre-ticked. Volumes without a result, or still being calculated, are greyed out with the reason. Further there are title, author and the tick "Attach site plan"; title, author and the tick are remembered. If there are axes with saved cross-section parameters, a second list "Cross-sections" follows below (nothing pre-ticked) with the tick "Attach profile sheets", which is remembered as well. The report calculates these axes afresh and appends, per axis, the table, the longitudinal section and, on request, the profile sheets. At most 400 profile sheets are printed across all selected axes together; above that the sheets are omitted, table and longitudinal section stay complete, and the dialog says so beforehand. A report from cross-section axes alone is possible: if there are no volumes, the volume list and the site-plan tick are left out. Without any selection (neither volume nor axis) nothing is created.
Names and numbersThe shapes carry no name of their own. In the report A/B volumes are called "Volume A/B n" and classic volumes "Volume n", and the same label is shown at the top of the A/B block of the shape card. n is the rank among all volumes of that kind in the project in shape-list order. If you delete a volume, the following ones move up, on the card as well. The "No." column counts 1, 2, 3 ... over the selected volumes independently of that; the same number appears in the site plan.
ContentPage 1: header with title, date, author, project (name of the point cloud), coordinate system, height system and program version; empty entries are left out. Then the table: area, cut solid, factor, haul-off loose, fill solid, factor, fill demand, net and the totals row. Without factors set it shows 1 and loose equals solid. After that the site plan and the basis per volume: layer, reference, comparison, cell size, method and the hints of the card. Many volumes run onto further pages, the table header repeats. Cut and fill values appear in the tables (including cross-section tables) as colour fields in the colours from Settings → Display → Cut/fill colours; a “Cut / Fill” legend sits below the table.
Classic volumesA classic volume appears in the report with cut and fill depending on its reference mode: pile = cut (volume above the reference), pit = fill (volume below the reference), net = both. This is a convention for the report; the card still shows "Volume (pile/pit/net)". The report's net is fill minus cut, as with the A/B volume; the "Volume (net)" label in the view shows the same figure (fill minus cut), so both signs agree; an excess of cut appears negative. Exception: the GeoJSON export (`volume_m3`) and the stored value keep the sign "above minus below", i.e. the opposite sign to the net label; the layer window, by contrast, sums the displayed value. The figures use the same reference (plane or TIN from the boundary) and cell size as the card. An installed volume (installation base) is not part of cut and fill but is stated as a separate sentence in the basis; the card total can therefore differ from cut + fill. As with the A/B volume, bulking and compaction are two fields on the card (0.5 to 3, two decimals, empty = 1, one undo step, no recalculation); they are your input. Cut and fill are not saved in the project but derived from the point cloud; without a loaded cloud the row shows as "not available".
Unit and roundingThe report follows the display unit at the moment of creation (metres, feet or US feet). Quantities and areas have one decimal, factors two. The totals row is formed from the unrounded values; the individual values shown therefore do not always add up exactly to the total shown (with many rows the difference can reach several tenths). Net is always fill (solid) minus cut (solid). The German report uses a comma as decimal separator throughout, the English one a point. A note on this is printed in the report.
Site planTop view of the selected volumes. The image shows: point cloud, visible shapes (lines, areas, volume columns) with their vertices (only with vertex dots switched on), DEM, map overlays and contour lines, plus numbered marks, north arrow and scale bar. It does not show: section box, ground grid and all labels (shape info, height labels, contour labels and DXF texts). North is grid north of the project coordinate system. The image is captured anew from the cloud, not from the screen; point size and line width follow the extent. The bar is only right if the page is printed at actual size, not with "Fit to page". If the capture fails, the report is made without the site plan and the status line says so.
SnapshotThe report shows the state at the moment you confirm. It is not saved in the project; to get it again later, create it anew. If a selected volume was deleted in the meantime or is being recalculated, it is missing from the report and the status line names it.
LimitsCharacters outside the PDF standard character set (for example some special characters in names) appear as "?". Long names are shortened in the table. The accuracy of the figures is that of the volumes themselves (raster cell, sources, reference surface). There are no labels in the site plan, and overlapping labels are not resolved.

Work with your own point cloud.

Open point clouds, trace existing features and export geometry for CAD — directly in your browser, with point cloud data processed locally.

Try free for 14 daysRequest a demo