Status: app version v26.11.250.0

Section box

The section box (formerly “Clipping”) hides spatial regions of the point cloud — either inside or outside. Hidden points are no longer snappable and do not count towards volumes.

Action Effect
“Section box” toolActivates the box and opens the “Section box” panel. Drag a box open in the viewport; a right double-click or the eye button in the title bar hides the box — the panel with sliders, slots and animation stays open and shapes are clickable again; a right double-click on the view or the eye button again shows the box; Escape and “Close” on the panel end the tool as well (with the box hidden, Escape closes the panel) (not in the middle of a drag), and “Section box: on” re-enters it; the “Section box: on/off” toggle switches the filtering itself.
3D handlesArrows on the walls move individual faces, the sphere in the middle moves the whole box, the arcs at the corners rotate about X/Y/Z. All handles are scaled to screen size and are therefore equally handy at any cloud size.
“Section box” panelSize X/Y/Z, position X/Y/Z (box centre) and rotation Z by slider or as an exact number — in the configured unit (m/ft/US ft). The panel blocks nothing: orbit, zoom and all keyboard shortcuts stay usable while it is open. While the panel is open, the centre of the view sits in the free area next to it. “Close” only closes the panel; clicking the tool again reopens it.
“Fit box”Wraps the box around the visible point cloud — and creates one even if no box exists right now (the quickest way back if you have lost track of it).
“↩” in the panelUndoes the last section box change, up to 20 steps. Its own history, separate from the shape undo (Ctrl+Z) — and it also brings a deleted box back.
LAS/LAZ exportWith a clip box set, the export dialog (File → Export point cloud) shows the tick “Clip to clip box”; its label states the direction (“keep inside only” or “remove inside”, depending on the inside/outside mode). The cut affects the file only — cloud and display stay unchanged — and is applied after merging, before boundary and thinning; the box is converted correctly even when the coordinate shifts differ. The filename gets the suffix -clipbox. If no points remain, the export is cancelled. The tick is off every time the dialog opens.
"Delete hidden…"Permanently deletes the points the section box currently hides from the active slot (full and display cloud). Cannot be undone; the class filter does not take part — only the box decides. Refused while a transform is open or the slot DEM projection is active. It affects the loaded cloud only: reopening the original file or reloading the project brings the points back unless you export the cloud first. The button is disabled while there is no box or no cloud.
Memory 1–4Four slots in the panel. A click on a filled slot loads box, mode (inside/outside) and animation, a click on an empty slot stores the current state, Shift+click overwrites a filled slot. Loading is one step of the box history (“↩”). Slots are saved with the project.
AnimationPick axis X/Y/Z (the box's own axes — if the box rotates, they rotate with it), take start and end with “Current position” (start is the reference and always shows 0; the end field shows the distance start → end along the axis and can be typed), use “Go to start” / “Go to end” to set the box there (one box-history step), set the duration (0.5–600 s) and playback (1×, loop, ping-pong), then Play. The box centre moves evenly from start to end; size and rotation stay. Stop, Escape, a handle drag, an entry in the panel or loading a slot ends the animation — the box stays where it is. “Playback resolution” sets how many points the cloud shows while the animation runs (0.5 M up to Full; the measured frame rate is shown next to it) — a higher step means a sharper picture but fewer frames per second.
Section viewThe “Section view” switch in the section box tile splits the window: the 3D view on top, below a section image of the points inside the box. Section type XZ or YZ (box planes) or “Line”. The image shows only the analysis-active cloud, with axes, vertical exaggeration and “Fit”; the divider changes the height. The section follows the box live (handles, tile, animation).
Path profileThe “Path profile…” button on an open polyline fits a box around the line, selects the section type “Line” and opens the split view: the station runs along the line, points are assigned to the nearest line segment, points before the start and beyond the end are dropped. Editing the line refits the box and stops a running animation. In line mode “Position Y” shows the offset across the line (0 = box centred on the line); it moves the strip sideways while the position along the line stays fixed.
Measure in sectionThe “Line” and “Circle” buttons in the section view header measure temporarily: line = two clicks (length, height difference, slope), circle = centre and rim point (radius, diameter). Shift snaps to the nearest section point within 12 pixels. Dragging still pans the view. Without a measuring tool a click selects a measurement, Del deletes it. Esc cancels (draft, selection, tool); when nothing is left to cancel, the next Esc leaves the section view, and only the one after that runs the app's normal chain. While the section view has focus, Del/Backspace belong to it — they never delete the section box or a 3D shape (not with Ctrl/Alt/Cmd held). All values are true dimensions, also with exaggeration; in line mode the horizontal part is the station difference along the line. Measurements are neither saved nor exported and disappear when the view is closed, when the section type or line changes, and with “Clear measurements”.
Compact viewThe arrow in the panel header switches to the compact view: four axis buttons (Auto, X, Y, Z), two sliders and Play. “Position” moves the box centre along the chosen box axis, “Thickness” changes the box size along the same axis (the centre stays). “Auto” uses the box axis most parallel to the viewing direction (top view of an unrotated box: Z) and only switches when another axis leads clearly while you orbit; the axis currently in use is marked dashed. Clicking X, Y or Z fixes the axis and turns “Auto” off. While the animation runs the axis stays unchanged until it stops. The arrow switches back to all settings. The state and the axis choice are remembered on this device.
WindowDrag the tile by its title bar to any place; double-click a free spot of the title bar to put it back in the corner. “100 %” shrinks the view in steps (75, 67, 50 %); content and footer scale with it and the tile gets narrower accordingly — before the first choice it starts at 50 %, “—” collapses the tile to its title bar (double-clicking the title does the same). Everything is remembered on this device.
Axis coloursX is red, Y green, Z blue — in the panel as on the 3D handles and the axis gizmo.
Del / BackspaceDeletes the section box while the tool is active and the focus is not inside an input field. Recoverable via “↩” in the panel.

Work with your own point cloud.

Open point clouds, trace existing features and export geometry for CAD — directly in your browser, with point cloud data processed locally.

Try free for 14 daysRequest a demo